EW1226 Web Camera HD 720p USB 2.0 with Microphone.
Installation CD-ROM with software and manual
2.0 Installation procedure
Follow the steps below to install the web camera on your computer.
2.1 Installing the web camera
Note! It is not necessary to install the software of the web camera! This web camera
also works without software installation thanks to UVC support (Universal Video
Class). You have to install the software if you want to use the additional extra features.
1.
Make sure your computer is turned on and is completely stated.
2.
Connect the web camera to an unused USB port of your computer.
3.
Windows detects new hardware and will automatically install the necessary
drivers.
4.
Insert the supplied installation CD-ROM in the CD-ROM or DVD drive of your
computer.
5.
Choose ‘Install software’.
6.
Click ‘Next’. The software will be installed.
7.
Click ‘Finish’. Congratulations, your web camera is now installed and ready for
use!
Attention! When using Windows XP, a ‘Windows logo test’ warning may appear. Click
‘Continue anyway’ to continue the installation procedure.
When using Windows Vista or Windows 7, a message may appear asking your
permission to continue the installation.
2.2 Configuring the web camera
1.
Click ‘Start’.
2.
Click ‘Programs’ or ‘All programs’.
3.
Click ‘EW1226 Webcam Utility’ to start the web camera software.
4.
Click ‘Options’ in the menu bar.
5.
Click ‘Video Capture Pin’.
6.
Select the preferred ‘Frame-rate’. Frame rate is the number of frames (pictures)
the web camera shows every second. The maximum frame rate is 30.000.
7.
Select the preferred ‘Output Size’. The output size is the screen resolution as
shown on your monitor. The higher the resolution, the larger the web camera
image will be in size.
8.
Click ‘Apply’.
9.
Click ‘OK’.
