User Manual
EW-M47
Figure 13
Figure 13-1
(G)
(G)
(G1)
(E)
8
Extendable Joystick Adjustment
Option : Swing-away Joystick Adjustment
The joystick can be adjusted so that it is in a convenient position for use. To adjust the
unit forward and backwards immediate underneath the armrest pad there is a hand knob
which when loosened allows the horizontal tube to be adjusted to the required position.
To adjust the unit vertically, there is a hexagon key screw in a hexagon nut attached to
the tubular construction supporting the joystick. Using the hexagon key provided loosen
the screw, adjust unit to the required height and re-tighten screw to secure.
Joystick conversions to left hand
1.Remove joystick and horizontal tube from right hand arm by releasing hand knob and
hexagon screw (G). (See Fig. 13)
2.Remove the two screws holding the support tube to the joystick and rotate the tube
through 180
o
to the opposite side and secure to the joystick (G1) with the screws.
3.To convert to opposite hands remove support brackets from pads and rotate through
180
O
and align with opposite screw holes and re-secure with screws
4.Secure the original right hand armrest to the left hand arm and repeat for the other hand
5.Re-position joyStick unit to left hand side of chair and assemble then secure to left hand
arm
6.Adjust heights and position as previous paragraphs
By pushing or pulling the joystick (G2) to
desired position. (See Fig. 13-1)
*Do not driving while operate above function.
*Watch out for pinch warning.
(G2)
