User Manual
EW-M47
12
Figure 18: The speed dial
Figure 19: The speed symbol
2.1.6 Controlling maximum speed
The speed dial allows the user to limit the maximum speed of the
wheelchair (that is, the speed when the joys�ck is fully deflected) to suit
their preference and environment.
The dial offers 10 discrete steps between the lowest speed (dial set to the
le�) and the highest speed (dial set to the right).
As a visual reminder, a speed symbol (shown le�) is posi�oned just below
the speed dial to indicate the low and high posi�ons of the speed dial.
Low
High
Low
High
2.1.7 The horn
Figure 20: The horn bu�on
The Horn bu�on is located above the Power bu�on. Press the Horn but-
ton to sound the horn. The horn will sound for as long as the Horn bu�on
is pressed.
2.1.8 The ba�ery gauge
Figure 21: The ba�ery gauge
Ba�ery
Gauge
The ba�ery gauge comprises five different LEDs (1 x RED,
2 x AMBER, 2 x GREEN), situated above the Remote's Horn
bu�on. The number of LEDs lit depends on the status of
the ba�ery, as shown below.
The ba�ery gauge LEDs are also used to display charging
informa�on. See sec�on 2.2 Ba�ery charging for more
details.
Warning:
It is the responsibility of the wheelchair manufacturer to inform the wheelchair user about the wheelchair's
stopping distances.
Figure 22: Ba�ery gauge opera�on
2.1.8.1 Normal opera�on
Ba�ery Gauge
Ba�ery Level
Notes
Fully charged
Consider charging
ba�ery
Ba�ery needs
charging
This level is set by the Ba� Gauge Maximum parameter.
This level is set by the Ba� Gauge Minimum parameter.
