User Manual
EW-M47
FREE WHEEL OPERATION
Always re-engage the free wheeling device after use. Failure to do so may
result in injury
Drive mode
Free wheel mode
To push the Powerchair by hand or in the event of a fault or battery failure the motors/gear
boxes can be released allowing the Power chair to be pushed.
The levers should be switched to the free wheel position. On the gear box by rotating them
through 90
o
Use the manual brakes to park the chair.
Regularly check the condition of front and rear tyres for wear and tear. Contact your supplier
for replacements. Your Powerchair may have split rim wheels which are held together by
screws or bolts. When these are removed the wheel rim separates for easy access to carry
out puncture repairs or tyre replacements.
Wheels and Tyres
Your Power chair can be disassembled and
folded for storage:
1.Fold the two footrest plates upwards (H1) and
press (H) button to swing away. (See Fig. 33)
2.Remove curb climber unit (if fitted)
3.How to Release Support Brace: By pressing right
side button (I), to release the support brace (J).
(See Fig. 34)
Disassembly & Storage
16
Figure 32
Figure 31
Figure 34
(I)
(J)
(H)
(H1)
Figure 33
