Design and function
Remote control
099-005593-EW501
10.01.2022
35
Item Symbol Description
0
4
Intermediate hose package
5
Power source
6
Workpiece
• Insert the electrode holder or gouge plug into the welding current connection socket (wire feeder) and
lock in place by turning to the right. The welding current polarity is changed by reconnecting the
welding power plug (intermediate hose package) at the power source.
5.4.2 Welding task selection
For selection of the welding task and for general operation see the relevant Control operating instructions.
5.5 Remote control
The manufacturer's warranty becomes void if non-genuine parts are used!
• Only use system components and options (power sources, welding torches, electrode hold-
ers, remote controls, spare parts and replacement parts, etc.) from our range of products!
• Only insert and lock accessory components into the relevant connection socket when the ma-
chine is switched off.
Remote controls are used for the remote operation of various machine functions.
Figure 5-20
Item Symbol Description
0
1
Remote control
• Insert the remote control connector plug into the wire feeder remote control connection (19-pole) and
lock by turning to the right.
