Safety, Environmental & Regulatory Information
5 (20)
3
Safety, Environmental & Regulatory
Information
3.1
Scope
The present heading addresses Safety, Environmental & Regulatory Information about the FLB
3601 – 3 USB ports extension card.
This extension card is belonging to the same compliance frame than the base units. In the
present case of a telecommunication extension card, additional directives, standards and
instructions apply.
3.2
ESD Damage Prevention
Always use ESD precautions when handling extension cards and / or opened base
unit as they contain parts and assemblies susceptible to be damaged by
electrostatic discharge (ESD).
The extension card described in this document is a module exposing both sides of an electronic
printed circuit board. Therefore, it is packed in an antistatic ESD bag. In order to avoid ESD
damage, the product must be handled with the necessary precaution including:
•
Grounded ESD protective work surface
•
Personnel grounding
3.3
Applicable Directives, Standards and Compliances
TheFLB 3601 inserted in a base unit belongs to class A Information Technology Equipment
(ITE). In a domestic environment, this product may cause radio interference in which case the
user may be required to take appropriate measures.
3.3.1
Applicable European Directives
The FLB 3601 is in conformity with the following EC directives:
•
RoHS Directive 2011/65/EU
•
RE Directive 2014/53/EU
3.3.2
Applicable Safety Standards
The FLB 3601 is in conformity with the following safety standards:
•
IEC / EN 60950-1
•
UL 60950-1
•
CSA-C22.2 No 60950-1-07
FLB 3601 – 3 USB Ports Extension Card Installation Guide
IG-0024-00 EN 1.1
