Glass Door Smart Lock User Manual
Recommended door type : Full Tempered Glass Single Door (frameless)
Glass thickness
: 10mm ~ 12mm
Operation power
: 4 pcs of AA Battery , emergency recharge door with power bank
Packages included
: Door lock unit and mounting bracket, mini USB adapter,
Remote control, proximity card
Keypad function ( in programming mode )
Menu/Cancel
Confirm / Enter
Right Cursor
Up Cursor
Down Cursor
Left Cursor
Enter programming mode by long press
C/M
for 2 ~3 second , select EMPLOYEE ->
OK
To enroll new user
Go to FINGER PRINT->
OK
, put same finger print for 2 time for confirmation enroll. You can
continue to enroll other finger print by press
OK
again
** 1 user id can enroll up to 4 finger print
You can continue go to IDCARD/TeleControl ->
OK
, to enroll for ID Card access by touch ID card
near to finger print sensor. Or you can enroll remote control by clicking remote control transmitter
key button
Select REGISTER ->
OK
, go to Employee ID by clicking Keypad
2
(Up cursor) then
OK
Assign yourself an ID (from 1 to 999) then
OK
** only ID CARD OR REMOTE CONTROL is allow in this option
To edit user
Enter programming mode by long press
C/M
for 2 ~3 second , select EMPLOYEE ->
OK
Go to VIEW USER and select user then
OK
You can adding other enrollment type such as password or modify ID CARD / TeleControl
Enrolled finger print CANNOT be modify or edit. You need to DELETE user then to enroll with new
