background image

EXACOM

VCR-2020

Copyright 1991, 92, 93, 94, 95, 96 all rights reserved by EXACOM, Inc.

2

COPYRIGHT

Copyright 1991, 92, 93, 94, 95, 96 all rights reserved by EXACOM, Inc.

No part of this publication, software, or product may be recreated,

reproduced, transmitted, transcribed, or translated into any other computer

or other languages, in any way without the express written consent of

EXACOM, Inc.

DISCLAIMER

EXACOM, Inc. makes no representations or warranties with respect to

this publication, software, or product and specifically disclaims any implied

warranties of merchantability or fitness for any particular purpose.

EXACOM, Inc. further reserves the right to revise this publication, software,

or product and make changes without any obligation to notify any person of

such revisions.

LIMITATION OF LIABILITY

EXACOM, Inc. will not be liable for any damages, including any lost

profits, lost savings or other incidental or consequential damages arising out

of the use or inability to use this product, even if EXACOM, Inc. or its

authorized dealer has been advised of the possibility of such damages, or for

any claim by any other party.

EXACOM, Inc. will have its liability limited to the repair or

replacement of the supplied original program diskette, associated publication

and any part or parts of the product or system for the period of the warranty.

WARRANTY

EXACOM, Inc. will warrant this product against defects in material

and workmanship under a limited warranty for a period of one year from the

date of shipment.  During this one year period the liability and obligation of

EXACOM, Inc. will be expressly limited to the replacement or repair of any

part or parts of this product or system.  This warranty does not apply to the

product if it is operated under conditions other than those for which the

system was designed.  Also, this warranty does not apply if the product has

been altered in any way which would be detrimental to the performance or

life of the product, or by misapplication, misuse, negligence, or accident.

After the expiration of the warranty period, EXACOM, Inc. will

provide the same repair and replacement service at the then-current rate for

materials and services.

Summary of Contents for VCR-2020
































Reviews: