16
©
2016, Industrial Test Systems, Inc. Printed in USA
SELECT TEST
Tap
'Select Test'
at the top (e.g. Alkalinity, Total).
The eXact iDip
®
and app will both display the
test being run. If using the eXact iDip
®
570
, all
available tests will begin with
570
(see below).
FILL CELL
Rinse the cell 3 times with the water sample to
be tested and
FILL
to the top to begin test.
Use the included cleaning brush to clean the cell after
each test to achieve the most accurate result.
TIP
Alkalinity, Total AL
Bluetooth Test
Alkalinity, Total AL Selected
ZERO METER
Press
and the iDip
®
display reads 0
PPM
indicating the meter is ready for testing.
In bright light and liquid method situations use cell cover
for zeroing and reading.
TIP
SELECT, FILL, DIP, READ
17
exactidip.com
NON-STANDARD
METHODS
Download at exactidip.com or
exactidip570.com
Alkalinity, Total (when AL >200 ppm)
Molybdate
(120 sec)
Ammonia (eXact iDip
®
570 only)
Sul
fi
de (as S
2-
)
(180 sec)
Chloride, HR (as NaCl)
Turbidity
Chlorine, Combined
SPA Alkalinity, Total
Chlorine Dioxide
SPA Bromine, Total
Hardness, Total (when AL >200 ppm)
SPA Hardness, Calcium
Iron, Total
SPA Chlorine, Free
Manganese (as Mn
+2
)
SPA pH-II
AUTO-CALCULATED
METHODS
Chlorine, Combined Hardness, Magnesium
Residual Alkalinity
Chlorine, Total
Langelier Saturation Index (LSI) Sodium
See pages 20-21
Alkalinity, Total
Bromine, Total
Chloride (as NaCl)
Nitrate (as NO
3
)
(600 sec)
Chlorine, Free
Nitrite (as NO
2
)
(360 sec)
Chlorine, Total
(120 sec)
Ozone
Chlorine, Total High
(120 sec)
Peracetic Acid Low
Chromium (VI)
(240 sec)
Peracetic Acid
Copper (as Cu
+2
)
(120 sec)
Permanganate
Hardness, Calcium (as CaCO
3
)
pH-II
Hardness, Total High (as CaCO
3
)
pH, Acid
Hardness, Total Low (as CaCO
3
)
pH, Alkali
Hydrogen Peroxide
(100 sec)
Phosphate (as PO
4
)
(120 sec)
Hydrogen Peroxide High
Sodium Bromide (as NaBr)
Hydrogen Peroxide Low
(120 sec)
Sulfate (as SO
4
)
Iodine
Proceed to step 8 on page 18
STANDARD
STRIP
METHOD
The
STANDARD STRIP METHOD
(page 18) applies to both the eXact iDip
®
photometer and the eXact iDip
®
570 photometer unless otherwise stated
(some tests require a count-up time, listed below)
.
STANDARD
LIQUID
METHOD
Cyanuric Acid
(5 drops, 60 sec)
pH-BT (eXact iDip
®
570 only)
(2 drops)
Fluoride (eXact iDip
®
570 only)
(10 drops)
Metals
(2 drops, 120 sec)
The
STANDARD LIQUID METHOD
(page 19) involves adding the speci
fi
ed
number of drops (below) and mixing for a 20 second count-down
(some
tests require a count-up time, listed below).
Proceed to Step 8 on page 19
TEST METHODS
For more detailed instructions, all test procedures are available for
download at
exactidip.com
and
exactidip570.com
.
