XD2000 Terminal User’s Guide
- 5 -
Rev.1/0506
Removing and Loading Paper
1. Open the paper compartment by firmly grasping it on both leading
edges and pulling upward.
2. Remove any remaining paper and discard the plastic or cardboard
paper roll core.
(Be careful not to discard the gray support spindle.)
3. Eject any remaining paper by pressing the printer FEED button.
**CAUTION: Do not manually force the paper through the printer
mechanism. Doing so may cause damage to the printer unit.
4. Carefully insert a new paper roll so that the paper is fed from the
bottom of the roll.
5. Close the printer compartment so that it snaps firmly into place.
6. Press the FEED key to ensure that the paper roll has been properly
installed. If correctly installed, the paper will feed through the
compartment. Once completed, tear off the remaining paper.
