1/2
Support
Head Office
A: Ye
şilce Mh. Doğa Sk. Kökten Plaza No:6 Kat:2 34418 Kağıthane - İstanbul
T: +90 212 275 73 22 F: +90 212 275 73 66
E: info@exagate.com
Welcome to
PWG INLINE METER Quick Installation Guide
INTRODUCTION
Box Contents
•
PWG Inline Meter Main Unit
•
Assembly Screws
•
Mounting Kit
•
Power Cables
Before Installation!
Make sure your device is properly
mounted and ready to operate
safely.
Step 1
Plug-in Power Cables to PWG Inline Meter Main Unit. Wait for the
“
READY
”
LED. When the LED
comes online PWG Inline Meter Main Unit is ready to run.
Step 2
Main unit is equipped with default IP address
(
192.168.1.151
). For the first access to the
device a PC must be used to access the main
unit and devices should be connected to the
same network.
Your PC should have a static IP in order to
access PWG Inline Meter. You can carry out
these settings in TCP/IP Settings section of
Local Area Network Connection options.
Step 3
Write
192.168.1.151
on the address bar of your
browser (for instance Internet Explorer) and press
Enter button.
Homepage of the PWG Inline Meter Main Unit is as
follows: Default user name is
“
admin
”
and
password is
“
123456
”.