1/13/2005
2
EXAKTOR
®
INDUSTRIAL OVERARM
EXOA-2 BLADE COVER/DUST COLLECTOR
Your
EXAKTOR
®
EXOA OverArm Blade Cover/Dust Collector can be used with most table
saws. Coupled to an appropriate dust collection system, the OverArm Blade Cover/Dust Collector
helps control airborne dust thrown up by the revolving saw blade.
The EXOA-2 features a counter-balanced Guard Basket that accommodates saw blades up to 16”
in diameter, raised up to 4” above the table and tilted for cuts to 45 degrees. You can be quickly
position the Guard Basket to suit the saw blade and the material being cut, and it is equipped to
accommodate the splitter and anti-kick-back pawls that are installed on your table saw. When you
are changing blades the telescopic Boom and Guard Basket will swing easily out of the way.
The top surface and sides of the steel framed Guard Basket have shatterproof Lexan
¥
lenses,
which give you a clear view of the saw blade at all times. The ‘baffling’ effect of the Guard
Basket and the flexible hose connecting the Guard Basket to the telescopic Boom makes dust
extraction very efficient.
Installation is exceptionally easy. The vertical mast stands on the floor and is adjustable to the
height of the saw table.
The mast is fastened to the side of the saw table or table extension with two quick release levers.
For quick removal, these levers release the upper part of the mast. The mast supports a telescopic
four-inch diameter boom equipped for coupling to a 4” vacuum hose. The boom length is
adjustable to allow the saw fence to be positioned up to 70” from the saw blade.
The
EXAKTOR
®
EXOA-2 Blade Cover/Dust Collector has been carefully designed to fit and
work with your table saw. It will add an element of safety and its built-in dust collecting
capability will provide you with cleaner air to breathe.
Designed for Dust
Collection Only
The
EXAKTOR
®
EXOA-2 OverArm Blade Cover/Dust Collector is sold for dust collection only.
It must be used with, and does not eliminate the need for, anti-kick-back and splitter devices.
These devices are not supplied with the EXOA-2 OverArm Blade Cover/Dust Collector. The
provision of a splitter and anti-kick-back device is the responsibility of the saw owner and/or
user.
