13.
ASSEMBLY-MINI CHOPPER
1.
2.
3.
4.
1. Place the large work bowl onto the motor
housing with the main handle to the left of the
power panel. This aligns the bowl to properly
engage the safety interlock. Turn the main handle
to the right until it “clicks” or “locks” into place.
The main handle should now be centered with
the Power Panel.
2. Inset the Min Chopper Bowl into the Large
Work Bowl. You may have to rotate the bowl until
it is properly seated. The Mini Chopper Bowl is
not properly inserted if it can still be rotated.
3. Place the Mini Blade onto the main motor
shaft. You may have to rotate the blade partially
to properly “seat”onto the shaft.
4. Place the Work Bowl Cover onto the Work
Bowl with the interlock “tab” to the left of the main
handle. Turn the Cover to the right until it “clicks”
or “locks” into place. The “tab” should now be
aligned with the Main Handle.