15
OPTIC EXCALIBUR
English
L
CORRECT PROCEDURE OF
DECOMPRESSION
•
Insert the gun clamp (
L1
).
•
Move the switch (
L2
) to the
OFF
position to stop the equip-
ment.
•
Disconnect the power supply cable (
L3
).
•
Release the gun clamp (
L1
), point the gun into the tank of
the product and press the trigger to release pressure. At the
end of the operation, insert the gun clamp.
•
Open the recirculating-safety valve (
L4
) to release the residual
pressure always clockwise.
WARNING
:
If the equipment is still under pressure after per-
forming the operations above described because
of the nozzle or the fl exible hose clogged, proceed
as follows:
•
Loosen very slowly the gun nozzle.
•
Release the clamp.
•
Point the gun into the container of the product
and press the trigger to release pressure.
•
Loosen very slowly the fi tting of connection
from the fl exible hose to the gun.
• Clean or replace the fl exible hose and the
nozzle.
L3
L4
L1
Clamp inserted
Clamp released
L2
OFF
Summary of Contents for Larius
Page 2: ......