background image

4

Transmitter Functions (cont’d)

UNLOCK: 

 Press and hold the button for 3 seconds.

ThE DOORS wILL UNLOCk, ThE PARkINg 

• 

LIghTS wILL FLASh TwICE ThEN ILLUMI-

NATE FOR 30 SECONDS.

Other Remote Start Features

 

It is typically recommended that vehicles equipped with turbocharged engines 

allow the engine to idle for after driving to cool the turbocharger. when this Installer 

Programmable Feature is enabled, the system will automatically keep the engine 

running as follows:

•  With the engine running, hold the brake pedal and engage the parking brake.  

when the brake pedal is released, the system will keep the engine running for the 

programmed time (1, 2, or 3 minutes), and then automatically turn it off. 

•  Turbo Timer can be prevented from engaging, or “bypassed” if desired, by turning 

the engine off before engaging the parking brake, or if it’s already engaged, step on 

the brake pedal to turn the engine off.

  This feature will automatically start the engine should the vehicle battery drop be-

low 11 volts. This feature is very useful when the vehicle is parked for a long period 

of time in cold climates. you must activate this feature each time you park your car 

and wish to use it.

•  Turn the ignition switch “on”, then “off” (engine not running), and within 7 seconds 

press the valet switch twice.  The system is now in low voltage start mode. 

NOTE:

 when low voltage start is activated, it will activate once every two hours 

(maximum) until the ignition key is turned “ON”.

LOw BATTERy AUTOMATIC STARTING

TURBO TIMER FEATURE

PIT-STOP FEATURE

  This feature allows you to leave your engine running for making quick errands. To 

use this feature, have the engine running normally from the ignition switch and your 

foot off the brake pedal.  Press the Valet Switch twice; the parking lights will flash. 

Turn the key off and the engine will remain running for the programmed run time.

Summary of Contents for RS-240-DP













Reviews: