11
Programming Features (cont’d)
~ The horn will honk, the status lights, and the parking lights
will flash equal to the selected setting.
Step 5
If you wish to change more features, repeat steps 3 & 4 at this time�
Step 6
To exit programming, turn the ignition key “On” then “OFF”� Or, you can wait
10 seconds for programming mode to expire�
Feature #1 Remote Start Run Time
10 Minutes
(press “
lock
” button to program) -
DEFAULT
5 Minutes
(press “
unlock
” button to program)
15 Minutes
(press “
trunk
” button to program)
20 Minutes
(press “
start
” button to program)
This feature sets the period of time that the engine will run after being remotely
started� If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period�
Caution: The remote engine starting feature should NEVER be
used when the vehicle is parked in an enclosed structure or garage�
This group of User Programmable Features are all accessed as a group in the first
level of features’ programming� These features have a direct affect upon the sys-
tem’s operations, so the programming and operation of each are described�
Feature #2 Steady/Flashing Lights During Remote Start
Steady
(press “lock” button to program)
- DEFAULT
Flashing
(press “unlock” button to program)
This Feature configures the operation of the vehicle’s parking lights during the
remote start operation� The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
User Programmable Features
Feature #3 Confirmation Chirp Function & Volume
Low
(press “lock” button to program)
- DEFAULT
High
(press “unlock” button to program)
On Demand / High
(press “trunk” button to program)
OFF (no chirps)
(press “start” button to program)
This feature allows the choice of two different volume levels of the system’s confir
-
mation chirps, the you can hear and choose the setting with the best chirp volume
as you select each option� The “On Demand” setting allows you to lock and unlock
the doors without chirps� Similar to OEM keyless entry, pressing either function a
2nd time, will produce confirmation chirps.
Feature #4 Steady Siren or Pulsed Horn
Pulsed Horn Low
(press “lock” button to program)
- DEFAULT
Pulsed Horn Medium
(press “unlock” button to program)
Pulsed Horn High
(press “trunk” button to program)
Steady Siren
(press “start” button to program)
This feature changes only the audible output, in three different pulse timings, which
allow a degree of customizing of the horn’s sound during panic mode� The Steady
Siren setting is exactly that- a steady output for an optional electronic siren�
