Excalibur RS-330-EDP Operation Manual Download

Page: 4 / 16

The Transmitter

“

lock

”

button

“

trunk

”

button

“

unlock

”

button

“

start

”

button

Transmitter part numbers:

147-03

text buttons

147-03B

icon buttons

Call your dealer or visit
www.caralarm.com to order
replacement transmitters.

Transmitter battery replacement:

Remove the small screw from the
lower back case, and separate the
transmitter halves� Replace the 2
CR2016 batteries and reassemble
the transmitter case�

LOCK:

Press and release the “LOCK” button�

THE DOORS wILL LOCK, THE PARKIng LIgHTS

•

wILL FLASH, AnD THE HORn wILL HOnK OnCE�

UNLOCK:

Press and release the “UnLOCK” button�

THE DOORS wILL UnLOCK, THE PARKIng

•

LIgHTS wILL FLASH TwICE THEn ILLUMI-

nATE FOR 30 SECOnDS, AnD THE HORn

wILL HOnK TwICE�

Transmitter Functions Reference Guide

This system is ECHO compatible which means you can upgrade

it at anytime to have 2-way capability and greater range� It’s a

simple ugrade that only takes minutes so talk to your dealer about

upgrading with ECHO TECHNOLOGY today!!

Summary of Contents for RS-330-EDP

















Search results

Summary of Contents for RS-330-EDP

Reviews:

Related manuals for RS-330-EDP

Brands by name

Popular brands

Excalibur RS-330-EDP, Operation Manual

Search results

Summary of Contents for RS-330-EDP

Reviews:

Related manuals for RS-330-EDP

Brands by name

Popular brands