background image

6

Controlling The System (cont’d)

Panic Mode: 

Press & Hold the LOCK or UnLOCK button for 3 

seconds�

THE HORn wILL SOUnD, THE PARKIng 

• 

LIgHTS wILL FLASH AnD THE DOORS wILL 

LOCK  OR UnLOCK, DEPEnDIng On THE 

TRAnSMITTER BUTTOn USED� 

TO DEACTIVATE PAnIC, SIMPLy PRESS EI-

• 

THER THE LOCK OR UnLOCK BUTTOn AgAIn�

OR

OR

Auxiliary Functions 1-4

:

  The actual operation of these functions will vary from car to 

car� They are designed to operate extra vehicle functions like 

automatic sliding doors or motorized hatches� Aux 1-4 are only 

available on certain vehicles when this system is integrated with 

the vehicle’s data network� Consult with your installing dealer to 

find out if any of these functions are available for your vehicle. 

If so, confirm each operation with the transmitter and write each 

function in the blank space provided below for later reference�

Auxiliary 1 Function (___________________)

: To activate 

this function, press and release the “

trunk

” and “

start

” buttons 

simultaneously� 

Auxiliary 2 Function (___________________)

: To activate 

this function, press and release the “

lock

” and “

trunk

” buttons 

simultaneously�

Auxiliary 3 Function (___________________)

: To activate 

this function, press and release the “

unlock

” and “

start

” buttons   

simultaneously�

Auxiliary 4 Function (___________________)

: To activate 

this function, press and release the “

unlock

” and “

trunk

” buttons 

simultaneously�

Summary of Contents for RS-330-EDP

















Reviews: