Transmitter Functions (cont’d)
TRUNK RELEASE / ChANNEL 2:
Press the “TRUNK” button for 3
seconds�
•
THE SYSTEM WILL DISARM / UNLOCK AND THE
TRUNK WILL OPEN (IF EQUIPPED)�
REmOTE START:
Press and release the “START” button twice
within 5 seconds� (see user feature #8 for additional options)
•
THE PARKING LIGHTS WILL FLASH ONCE AND THE
STATUS LIGHT WILL FLASH RAPIDLY�
•
THE SYSTEM WILL TURN ON THE IGNITIONS AND
PROCEED TO START THE ENGINE�
•
ONCE THE ENGINE IS RUNNING, THE PARKING
LIGHTS WILL TURN ON AND STAY ON AND THE
STATUS LIGHTS WILL FLASH SLOWLY�
•
If the engine stalls, the system will make up to 3 more attempts�
•
Each time you park, set the climate controls as desired when you use the remote start� The
engine will run for the preset run time (see user feature #1)�
•
Run Time Extender
: Press the “START” button one time during remote start to restart the
engine run timer�
NOTE: This can only be used once per remote start cycle.
•
If you decide not to drive your vehicle, you can turn off the remote start using the same method
to turn it on (Default = press “START” twice in 5 seconds)�
NOTE: If remote start activation is programmed for 1 press, the 1st press activates Run
Time Extender so an additional press is required to turn off remote start.
•
Upon entering the vehicle during remote start mode, turn the ignition key to the “ON/RUN” posi-
tion (
NOT START!!
)� When you press the brake pedal, the remote start will turn off allowing the
ignition key to take over�
x2
PANIC:
Press and hold the “LOCK” or “UNLOCK” button for 3
seconds�
•
THE SIREN / HORN WILL SOUND, THE PARKING
LIGHTS WILL FLASH, AND THE DOORS WILL
LOCK OR UNLOCK DEPENDING WHICH BUTTON
IS PRESSED�
OR
4
Summary of Contents for RS-360-EDP
Page 14: ...Blank Page 14 ...
Page 18: ...Blank Page 18 ...
Page 20: ...Back Cover Color cover is in a separate file 20 ...