Transmitter Functions (cont’d)
SILENT LOCK / UNLOCK:
Press and release the “TRUNK” button
twice in 5 seconds�
•
THE PARKING LIGHTS WILL FLASH, AND THE
SYSTEM WILL LOCK/ARM OR UNLOCK/DISARM
DEPENDING ON THE CURRENT SYSTEM STATE�
x2
REmOTE VALET:
Press “LOCK” then “UNLOCK” then “TRUNK” +
“START” within 5 seconds�
•
THE SYSTEM WILL ENTER VALET MODE�
SEE PAGE 8 FOR MORE INFO ON VALET MODE�
1
2
3
SENSOR BYPASS:
Press and release the “TRUNK” button within 5
seconds of locking/arming the alarm system�
•
THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE
THE SENSOR IS BYPASSED�
NOTE: ALARM FUNCTIONS MUST BE ENABLED
AND AN OPTIONAL SENSOR ADDED TO USE THIS
FEATURE
LOw VOLTAGE/TEmP AUTO START:
Press and release the
“START” button within 5 seconds of locking/arming the system�
•
THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE
THE LOW VOLT/LOW TEMP (15 DEGREES ONLY)
AUTO START IS ACTIVATED�
NOTE: LOW TEMP AUTO START IS ONLY AVAILABLE
ON EDP+ MODELS. SEE PAGE 6 FOR MORE INFO.
1
2
2
1
5
Summary of Contents for RS-360-EDP
Page 14: ...Blank Page 14 ...
Page 18: ...Blank Page 18 ...
Page 20: ...Back Cover Color cover is in a separate file 20 ...