The Status Light
The status lights, located in the window-mount antenna, provide a visual indication
of the system’s status�
SECURITY SYSTEm STATUS
OFF:
The alarm is disarmed and not performing any automatic functions�
ON:
The alarm is in valet mode�
FLAShING SLOw:
The alarm is armed and monitoring all entry points�
FLAShING FAST:
One of the automatic arming features is in progress�
AUTOmATIC TRANSmITTER VERIFICATION
Every time you turn on the ignition key, the status light will flash a number of times
equal to the number of transmitters programmed to the system. This unique security
feature combats potential thieves (valet attendant, mechanic, etc�) from adding their
own transmitter without your knowledge and accessing your vehicle at a later time�
ALARm ZONE VIOLATION RECALL
If the security system is triggered, upon disarming, the status lights will flash
a number of times to indicate exactly which zones, have been violated� It will
store the last 2 violated circuits and continually repeat the flash pattern until the
vehicle’s ignition key is turned ON�
2 FLAShES:
Hood trigger
3 FLAShES:
Door trigger
4 FLAShES:
Sensor port trigger
REmOTE START STATUS
FLAShING SLOw:
The engine was remote started successfully and is running�
FLAShING FAST:
The remote start sequence has begun and is in process of starting
the vehicle’s engine�
2 FLAShES, PAUSE:
The engine is running while the alarm is armed�
REmOTE START DIAGNOSTICS
The remote start system can also indicate which zone caused the last remote start
cycle to end� To see this indicator, place the system into valet mode� Immediately after
the chirp, the status light will flash to indicate which zone violation occured.
1 FLASh:
Run time expired�
2 FLAShES:
Brake pedal was pressed�
3 FLAShES:
Engine stalled or a bad tach signal�
4 FLAShES:
Received transmitter command to stop�
5 FLAShES:
The neutral safety circuit was triggered�
6 FLAShES:
The alarm was triggered or low battery voltage�
9
Summary of Contents for RS-360-EDP
Page 14: ...Blank Page 14 ...
Page 18: ...Blank Page 18 ...
Page 20: ...Back Cover Color cover is in a separate file 20 ...