4.4.1 Check the specified type and all accessories of the closure
4.4.2 Fix the closure to the fixing bracket
4.4.3 Open the fibre closure
Loosen the bolts and open the closure
4.5.1 Necessary components for removing jacket of cables with uncut fibre
Loosen all the hexangular bolts installed at the
bottom of the base.
Remove all screws from the required cable
clamps.
Note. Please be careful when opening the enclosure so as not to damage the seal.
4.5 Installation of cable into the enclosure
4.5 The inlet of uncut cables
Number
Name
Quantity
Material
Application
1
Base
1
ABS+PC
Fixing cable
2
Two-hole seal ring
1
Vulcanized rubber
For sealing uncut fibre
3
Two-hole pressed button gland
1
ABS+PC
4
M6×30 hexangular bolts
1
Stainless steel
