11
1. When the C.O. line is in operator mode, the Operator mode ringing
extension (setting refer3.10.1&3.10.2)
will be ringing when calling in, the
caller can hear the ringing tone.
2. Operator mode or auto-attendant mode, certain C.O. line just can be
in one status, but if set the certain C.O. line into auto- attendant mode, the
operator mode will be canceled automatically.
3.6.3 Ringing mode when all the ringing extensions is busy
Format:
1 8 8 0 #
Description:
While the C.O. line coming in, and all the ringing extensions
assigned to C.O. line is busy , the system will send waiting call beep to the
ringing extensions for every five seconds, these extensions is assigned to
the C.O. line, this is default setting.
Format:
1 8 8 2#
Description:
enable the system to send waiting call beep.
Format:
1 8 8 3#
Description:
disable the system to send waiting call beep.
Format:
1 8 8 1 #
Description:
While the C.O. line come in, and all the ringing extensions
assigned to C.O. line is busy, instead of sending the waiting call beep, the
system will find the first idle extension begin from Ext. 601 to Ext. 608 in
sequence then ringing it.
These setting will take effect only when the system in operator mode
3.6.4 Setting Auto-attendant Mode (OGM) for All C.O. Lines
Format:
1 0 #
Description:
allows all the C.O. lines in Auto-attendant Mode (DISA --Direct
Inward System Access status). In this mode, Caller will hear the OGM recorded
message, while all extensions are in MUTE mode
1. If the caller doesn’t know the extension number, he cans inquiry the
operator by dialing “0”.
2. Outgoing Message must be record when setting this mode.
3.6.5 Setting Auto-attendant Mode (OGM) for Certain C.O. line
Format:
10M #
Explanation:
M: C.O. line No.1-No.3
Description:
allows the No.M C.O. lines in Auto-attendant Mode (DISA
--Direct Inward System Access status).
Example:
Set C.O. line 2 and 3 in Auto-Attendant mode, other C.O. line in operator mode.
Summary of Contents for MK-208
Page 1: ......
