39
same as extension C to call the external number. And Extension A stop
ringing.
II
、
When External user K to call extension A, the system will forward to
(directly/ busy/nobody available) external number M, after connected, 2
external numbers user can talk. When the talking time is beyond the
setting time (#84TT setting,default is 80s) ,then the system will send 10
seconds time DUDUDU alarm , at that time each external can press * to
proceed the conversation(90s). If no operation, the system will cut off the
call. Also when the conversation is over the call can be ended to press # at
any time.
III
、
When external user K is talking with extension C, extension C transfer
the talking to extension A, at that time the system will forward to (directly/
busy/nobody available) external M, after connected (if extension C doesn’t
hang up, it will connect to external M first, if extension C hang up, the
external M will talk with external K), the operation is same to item II.
IV
、
when the external user K is talking with the external number M
，
Extension C or Extension A can pick up and key #9 to talk with two external
users, talking time is not restrict ,when the Extension hang up, the system
will cut off the call.
Note: While forward to external number, the system will select one CO
line to proceed automatically
Note: If the Ext is at Direct-Dialing-Out mode, you should input: * # 84TT.
4.13 Inquiry Functions
Format:
# 61
Description:
During installing and testing of the system, it is very
convenient to find the Ext number. The system use “Beep” for this purpose.
Example:
After input # 61 on Ext. 603 you may hear 6 “du” , at about 1.5
seconds later , hear 10 “du” , at about 1.5 seconds later then you may hear
another 3 continuous “Beep” , that mean the Ext number is 603
1. 10 continuous du stands for “0”
2. If the Ext is at Direct-Dialing-Out mode, you should input: *# 61.
4.13.1 Reporting of Ext number for Caller ID phone
Format:
# 62
Example:
Pick-up Ext.605 (caller ID phone), Input # 62, after hear a du
then hang up, the extension will ringing one second ,and you
can see the extension’s physical number & current number
from the telephone: 00 05 15
1
、
If the Ext is at Direct-Dialing-Out mode, you should input: * # 62
2
、
The front two digit 00 is the adding CID number(refer 3.20.1)
4.13.2 Reporting of System time
Format:
# 63
Summary of Contents for MK-208
Page 1: ......
