Adjusting Power Level
Adjusting the Volume
5
With this option, you may adjust power levels quickly. We
recommend you to adopt low power for battery saving. However,
if you cannot communicate with radios located at a distant place
with low power, please select high power.
You may press the programmed
Adjust Power Level
key to
adjust power levels.
Selecting a Zone
A zone is a group of channels exhibiting the same property. The
radio supports 32 zones and each zone contains 128 channels
at most.
You can select a zone through any of the following methods.
●
Selecting a Zone through Menu
Procedure:
1. In the home screen, press the
Menu
key to enter the main
menu.
2. Go to “Settings -> Zone”.
3. Use the
Up
/
Down
key to go to a desired zone.
4. Press
OK
key to select the zone.
Selecting a Zone via Programmable Button
●
You may quickly toggle to your desired zone by pressing the
programmed
Zone Up
or
Zone Down
key.
Selecting a Channel
After turning the radio on, rotate the Channel Selector knob to
select a needed channel. You can also switch to the designated
channel by pressing the Preset Channel key.
If the Channel Notify function is active, you will hear the
corresponding channel number when switching to any channel.
After turning the radio on, rotate the
Radio On-Off
/
Volume
Control
knob clockwise to increase the call volume, or
counterclockwise to decrease it.
