Ending a Call
27
MPT Trunking Functions and Operations
All Call
Team All Call
1.Nobody hold down PTT Key for a long time ,and this radio
will end call automatically when the silence period expires.
2.This radio will end call when the total calling time expires
the preset time.
3.During calling, the calling party hang up.
4.Base station signal lost.
Two types of All Call are Team All Call and Whole Network All Call.
999is the last one Group Call number in this team ,When you
initiate a team All Call,all member in this team will receive and
respond to this call .
Three methods are aviaible for transmitting a Team All Call :
Transmitting a call to preset contacts ,transmitting a call through
group call contacts or through manual input number .
The specific operation is the same as the Group Call.
System All Call
When you transmit a System All Call ,all user in this system
will join in this call.
1981is the number of System All Call.
Three methods are aviailable for transmitting a System All Call :
Transmitting a call to preset contacts ,transmitting a call through
group call contacts or through manual input number .
(Add * Key before 1981).
Emergency Call
Emergency Call can be Emergency Private Call or
Emergency Group Call .
The following two methods are available to initiate a
Emergency Call.
1.Press Emergency Call Key to initiate a Emergency Call.
The called number can be set via programming software
in trunking mode .
2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ).
Use P1 key ,PPT Key or # key to initiate a call.
Broadcast Call
Priority Call
Via programming software configuration to set a Priority
Call level:Low ,Middle ,High or Preempted Call .
You may initiate Priority Call through manual dail
(Add *8* before number).
Use P1 Key , PTT Key or # key to initiate a call.
Dispatch Station Call
This radio can call the Dispatch Station. The number
of Dispatch Station are based on configuration.
Broadcast Call only can be Broadcast Group Call .
Only the calling party has the rights of speech.
You may initiate Broadcast Call through manual input .
(Add *11* before number ).
Use P1 key
,PTT Key or # key to initiate a call.
