37
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
vi. Q53 Zigbee PAN and Bridge Configuration
Troubleshooting Tips
Figure 9—Zigbee Status Form
Some things to check:
•
Do the selected radio channels match the channels in use by the local Zigbee PAN?
•
If PAN ID filtering is in use, does the PAN ID filter match the PAN ID used by the
local Zigbee coordinator?
•
If Extended Address Filters are in use, do the Zigbee MAC addresses match those
of the devices to be bridged?
Zigbee Bridge
The Zigbee Bridge Status form is helpful in determining the current state of the Zigbee
bridge connection.
1. Load the Q53 HTML forms as described in
on page 18, then select
"Bridge" from the Main Menu. The Bridge Settings form will be displayed.
2. From the Bridge Settings form, select "Status".
Or, go directly to the Bridge Status form by typing the following into your browser:
http://Q53IPaddress/bridgeStatus.html
The Bridge Status form is displayed (
