51
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009
vii. Using HTML Pages to Configure the Q53
Administration Forms
Figure 21—Password Form
All settings are protected by a password so that only authorized users can make
changes. When you try to open any configuration page, you will be asked for a
user name and password. At the prompt, you will need to enter
root
(unless you
have another user configured with root privileges) followed by the associated
password. If there is no password, leave the field blank and press ENTER.
Settings can only be altered by a user with root privileges; guest users can only view
settings. Both types of users can be assigned passwords. To change a password, type the
old password in the "Old" field. Then type the new password twice: once in the "New"
field and once in the "Confirm" field.
Default:
Blank passwords for root and guest users.
SNTP Settings Form
the SNTP Settings Form (
) facilitates configuration of the Simple Network
Time Protocol (SNTP) client in the Q53. SNTP is used by the Q53 to synchronize its
local time-of-day clock with that of a central server.
