22
ASSEMBLY
Step 12
Assemble U Shape Bracket Covers.
Pair the
U Shaped Bracket Covers A (97A)
&
Covers B (97B)
for each of the Cranks (10). Ensure
that each pair are orientated so that the cut-out edges are facing the
Crank (10)
. Insert the posts of
the U Shape Bracket Covers B (97B) into the holes at the rear of the Left (9L) & Right Foot Bars
(9R) and enclose the U Shape Brackets (8) of the foot bars by sandwiching the
U Shape Bracket
Covers A
(97A)
over it. Secure all the
U-Shaped Bracket Covers A (97A)
and
Covers B (97B)
with four
Round Head Self Tapping Screws (59)
. Tighten the screws with the
Multi Hex Tool with
Phillips Screwdriver
until they are firm and secure.
The screws will insert from above on the left side. The screws on the right side will insert from
below
Tool:
Multi Hex Tool
With Phillips Screwdriver
1PC
(59) Round Head Self
Tapping Screw
4 PCS
Hardware:
Summary of Contents for 1317.5-101016
