background image

 

 

IMPORTANT SAFETY GUIDELINES

 

 

 

Read all guidelines before using this machine. When using this machine, 
basic precautions should always be followed, including the following: 
WARNING - To reduce the risk of injury to persons:

 

 

1. 

Make sure your equipment is correctly assembled before you use it.   

2. 

Be sure all screws, nuts, and bolts are tightened prior to use.   

3. 

Before using this equipment, we recommend doing warm ups.     

4. 

Only one person should be using the equipment at a time. 

5. 

Never operate this Equipment if it is damaged, if it is not working properly, has been dropped, or 

damaged. If a problem is encountered contact Customer Service before using the equipment 

again. 

6. 

Always use this equipment on a clear and level surface.   

7. 

For household use only. 

8.  Do not use outdoors or near water.

 

9. 

Use the machine only for its intended use as described in this manual. Do not use attachments 

not recommended by the manufacturer. 

10. 

Do not wear loose clothing when using the equipment.   

11. 

Never drop or insert any object into any opening. 

12. 

If at any time you feel faint, light-headed, or dizziness while operating the equipment, stop 

exercising immediately. You should also stop exercising if you are experiencing pain or any 

discomfort.   

13. 

For any problems contact customer service. Servicing should be performed by an authorized 

service representative. Our contact number is on the service page. 

14. 

This product requires a minimum of 6 square feet of space for safe operation.

 

15. 

Be careful to always hold onto the handlebars when you’re mounting and dismounting.   

16. 

Be careful to have the pedals at their lowest point when stepping off.   

17. 

Hold onto the handlebars and use both the pedals in tandem to ensure a smooth, effective 

workout. 

18. 

Warning:

 

- Risk of Personal Injury - Consult with your personal physician to see if exercise 

equipment is appropriate for you. This is especially important for people with pre-existing health 

problems. Do not use this equipment without your physician's approval. 

 

19. 

Warning:

 

Risk of Personal Injury 

– Do not allow children to use this machine.

 

20. 

Warning:

 

Risk of Personal Injury - Keep children under the age of 13 away from the 

machine.

 

21. 

Warning:

 

Risk of Personal Injury 

– Keep body parts, hair, loose clothing, and jewelry 

clear of all moving parts. 

 

22. 

Warning: 

- Risk of Personal Injury -

 

Do not attempt to service the unit yourself. 

Discontinue use and contact customer service.

 

23. 

Warning

To Reduce The Risk Of Personal Injury - Read And Understand All Read The 

Instructions Before Using This Machine

 

24. 

WARNING: 

CANCER AND REPRODUCTIVE

 

HARM--WWW.P65WARNINGS.CA.GOV.

 

Summary of Contents for 900XL


























Reviews: