12
ASSEMBLY
STEP 2
2a. Installing the Left & Right Pedal Straps to the Pedals:
Install the
Left Pedal Strap (13)
onto
the
Left Pedal (38)
. Install the
Right Pedal Strap (15)
onto the
Right Pedal (14)
. See
Figure B.
2b. Installing the Left Pedal:
Insert the threaded shaft of the
Left Pedal (38)
into the threaded
hole on the Left
Crank (64)
. Turn the pedal shaft by hand in a COUNTER-CLOCKWISE direction
until snug. Install the
Left Nylon Nut (90)
and
Spring Washer (91)
onto the protruding thread of
the
Left Pedal (38)
in a CLOCKWISE direction. After doing so, finish off the tightening of the parts
in the same direction as instructed with the
Multi Hex Tool
with Phillips Screwdriver
and
Open
Wrench
provided
.
2c. Installing the Right Pedal:
Insert the threaded shaft of the
Right Pedal (14)
into the threaded
hole on the
Right
Crank (64)
. Turn the pedal shaft by hand in a CLOCKWISE direction until snug.
Install the
Right Nylon Nut (89)
and
Spring Washer (91)
onto the protruding thread of the
Right
Pedal (14)
in a COUNTER-CLOCKWISE direction
.
After doing so, finish off the tightening of the
parts in the same direction as instructed with the
Multi Hex Tool
with Phillips Screwdriver
and
Open Wrench
provided
.
Open Wrench
1PC
TOOL
Right
Left
Multi Hex Tool with Phillips
Screwdriver
1PC
The Cranks, Pedal Straps, Pedal Shafts, and Foot Pedals
are marked “R” for Right and “L” for Left.
Summary of Contents for 975XBT
Page 5: ...3 LABEL PLACEMENT...
Page 8: ...6 OVERVIEW DRAWING...
