18
ASSEMBLY
Step 8
8a. Removal of Hardware for Installation:
Remove four
Phillips Screws (24)
from the
Console
(23)
.
8b. Connecting the Console Wires:
Connect the
Lower Console Wire (17)
from the
Front Post
(2)
to the
Upper Console Wire (87)
from the
Console (23)
. Connect the
Hand Pulse Wire A (18)
coming from the
Front Post (2)
to the
Hand Pulse Wires C (88)
coming from the
Console (23)
.
See
Figure D.
8c.
Installing the Console:
Attach the
Console (23)
onto the
Front Post (2)
, and tighten the four
Phillips Screws (24)
with the
Multi Hex Tool with Phillips Screwdriver
provided.
WARNING: This Console Is Not Battery Operated. Use The Adaptor Provided To Power The
Console. See Step 9.
Multi Hex Tool with Phillips
Screwdriver
1PC
TOOL
Summary of Contents for 975XBT
Page 5: ...3 LABEL PLACEMENT...
Page 8: ...6 OVERVIEW DRAWING...
