11
ASSEMBLY
STEP 3
3a.
Remove the
Seat Post (4)
from the
Main Frame (1)
by turning the
Spring Knob (77)
Counter-
clockwise and pulling
the Seat Post (4)
up
.
See Fig. A
3b. Seat Post & Seat Installation:
Pull the
Spring Knob (77)
out,
insert the
Seat Post (4)
into the
Main Frame (1)
, release the
Spring Knob (77),
Press down on the
Seat Post (4)
until it
“Pops”
into one of the adjustment holes and tighten the
Spring Knob (77) Clockwise.
Attach the
Seat (45)
onto the
Seat Bracket (6)
by using
13-15mm Wrench
provided.
See Fig. B.
TIP :
When adjusting the height of
Seat Post (4),
the
STOP
line cannot be higher than
the edge of the plastic bushing.
TOOL:
13-15mm Wrench
1PC
