13. Computer Installation
Remove four Computer Bolts (32) from the back of the Computer (99).
Remove bolts with the Hex Tool with Phillips Screwdriver provided.
Connect the Extension Sensor Wire I (93), Hand Pulse Sensor Wire (97),
Left Control Buttons Extension Wire (109), and Right Control Buttons
Extension Wire (110) to the wires that come from the Computer (99) and
then attach the Computer (99) onto the top end of the Hand Pulse
Handlebar (15) with four Computer Bolts (32) that were removed. Tighten
bolts with the Hex Tool with Phillips Screwdriver provided.
14. AC Adaptor Installation
Plug one end of the AC Adaptor (75) into the power jack of the Power
Supply Cable (106) on the front of the Left Shroud (63). Before plugging
in, make sure to check carefully the specifications on the Adaptor. Plug
the other end of the AC Adaptor (75) into the electrical wall outlet.
ASSEMBLY
23
Hex Tool with Phillips Screwdriver
Tool:
99
15
32
93
109
110
97
75
106
63
Summary of Contents for Pro Stride 23
Page 4: ...3 LABEL PLACEMENT...
