Step 2. Left and Right Pedal and Pedal Strap Installation
The Cranks, Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Install the
Left and Right Pedal Straps (7-1, 8-1)
on to the
Left and Right Pedals (7, 8)
. (see
Fig.AA-2).
Remove the
Left Nylon Nut (84)
from the
Left Pedal (7)
. Insert the
Left Pedal (7)
into the
threaded hole in the
Left Crank (23)
. Turn the Left Pedal shaft by hand in a
counter-clockwise
direction until snug. Then simultaneously tighten the
Left Pedal (7)
using the Wrench 13-15mm
Wrench and the
Left Nylon Nut (84)
with the
Wrench 19mm provided
. (see Fig. AA-3).
Remove the
Right Nylon Nut (118)
from the
Right Pedal (8)
. Insert the
Right Pedal (8)
into the
threaded hole in the
Right Crank (24)
.Turn the Right Pedal shaft by hand in a
clockwise
direction until snug.Then simultaneously tighten the
Right Pedal (8)
with the
13-15mm Wrench
,
and
the
Right Nylon Nut (118)
with the
19mm Wrench
provided.
Important:
Make sure the right pedal matches up with
the right crank and the left pedal matches up
with the left crank. If reversed the cranks
may become damaged or stripped.
Important:
Screw the Right Pedal (8) into the Right
Crank (24) in a
clockwise
direction.
Screw the Left Pedal (7) into the Left Crank
(23) in a
counter-clockwise
direction.
Tool
13-15mm Wrench
19mm Wrench
The Cranks, Pedal Straps,
Pedal Shafts, and Foot
Pedals are marked “R” for
Right and “L” for Left.
10
ASSEMBLY
