Connection Setup for DSL/IP Triple-Play Verification Tests
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
137
Setup Line Connection
Setup Line Connection
Line Parameters
The
Line Params
tab allows you to set the basic DSL and Ethernet
negotiation modes for a
Selected Profile
composed of the current
LineMode
and
AccessMode
selections.
When the
LineMode
selection is
ADSL2+
, the available parameters are
the following:
³
Annex
defines the modes of
available ADSL Annexes from the
ITU standards.
³
Annex A
is ADSL service
functioning over POTS.
³
Annex B
activates the ADSL functionality over
ISDN
.
³
Annex M
allows increased upload speeds from 1 Mbps to
3.5 Mbps.
³
Annex L
assumes an increase in ADSL range/distance.
³
VPI
is the virtual path identifier (VPI) ranging from 0 through 255 for the
ATM connection.
³
VCI
is the virtual circuit identifier (VCI) ranging from 32 through 65535
for the ATM connection.
