Connection Setup for DSL/IP Triple-Play Verification Tests
140
AXS-200/635
Setup Line Connection
To select the WAN access parameters to configure:
1.
From the
Connection Setup
pane, press the left/right function arrows
until the
WAN Access
tab is displayed.
2.
Press the F1, F2, or F3 key located just below the tab to select it.
3.
Press the up/down arrows to select the desired parameter.
4.
Press
to open the list or modify the parameter.
5.
In the list, press the up/down arrows to select the function or mode.
OR
Use the alphanumeric keypad to enter the value you want to specify.
6.
Press
to confirm the selection.
