Connection Setup for DSL/IP Triple-Play Verification Tests
144
AXS-200/635
Setup Line Connection
LAN Setup
The
LAN Setup
tab allows you to configure the parameters required when
working in
Throughmode,
and the local area network (LAN) is connected
to the ethernet interface. These parameters only apply when the WAN
access mode is set to
Routed.
The described
Selected Profile
is composed
of the current
LineMode
and
AccessMode
selections.
The available parameters are the
following:
³
VLAN Tagging
enables the unit to
recognize frames with a specified
PVID. This entry is disabled if
VLAN Support
is set to
Disable
on
the
WAN Access
pane.
³
LAN DHCP Server
enables the
dynamic host configuration
protocol (DHCP) mode for the LAN side of the connection.
³
LAN IP
is the local network IP address of the unit.
³
LAN Subnet Mask
is the network address mask used to identify if the
IP address is within the same local area network.
³
ARU-100(HPNA)
enables you to be
Connected
or
Disconnected
from
the HPNA test probe.
Connected
allows monitoring of
HPNA Info
in a
triple-play application. The entry is only visible with the HPNA software
option and if
Line Mode
selected is
not
HPNA-coax
.
