Configure Tests for DSL/IP Triple-Play Verification
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
155
Configure DSL/IP Tests
TraceRoute
The
TraceRoute
tab allows you to trace an IP packet from the unit (or a
computer) to a specified IP destination and define how many hops the
packet requires to reach the destination. This test is useful in determining
where the longest delays are occurring along the network path.
The available parameters are the
following:
³
Address Format
lists the address
either as a
URL
or
IP Address
.
³
Destination Address
is the
destination IP address.
³
Max hops
is a value from
1 through 99 specifying the
maximum number of hops to be used in attempting to reach the
destination IP address. The default value is 32.
To select the traceroute parameters to configure:
1.
Press the up/down arrows to select the desired parameter.
2.
Press
to open the list or modify the parameter.
3.
In the list, press the up/down arrows to select the function or mode.
OR
Use the alphanumeric keypad to enter the value you want to specify.
4.
Press
to confirm the selection.
