Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
9
2
Getting Started with Copper
Qualification Tests
The AXS-200/635 is designed to test basic twisted pair quality, identify and
locate faults, perform advanced single-ended loop tests, and troubleshoot
noise and signal issues all the way up to 30 MHz in support of the VDSL2
standard. These measurements offer a quick and thorough method to
determine if the cable is capable of supporting xDSL technology. In
addition, it utilizes noise measurements, longitudinal balance tests, and
power spectral density tests to assist in the installation, maintenance, and
troubleshooting of copper cables.
To access copper qualification
tests:
1.
From the
Home
pane use the
up/down arrow keys to highlight
Copper Qualification Tests
, then
press .
2.
From the
Copper Qualification
Tests
pane highlight the desired
menu item, and press
.
POTS Dialing
The
POTS Dialer
function provides a dial-up path from the AXS-200/635 to
another tester (or quiet termination or silent switchman) through a
switched circuit network. DTMF transmission is enabled via the AXS-200
keypad allowing you to place and receive POTS calls. The dialer can be
accessed from the
Copper Qualification Tests
pane and is also integrated
into individual test screens to give you quick access to the manual dialer
function, speed dial and last dialed lists, without exiting the current test
application.
