Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
163
12 Running CPE Tests
The purpose of the CPE Test function is to establish a connection to the
DSLAM and confirm the status of the DSL line. You can then log on to an
ISP to perform advanced tests, including Ping, TraceRoute, and download
speed tests.
To view the available tabs:
Press the left/right function arrows on each side of the F1, F2, and F3 keys.
Reading Results
Test Summary
The
TestSummary
tab allows you to view the
PASS
/
FAIL
status and
Details
of a series of CPE test results.
The available test results are the
following:
³
Line Status
displays either
Connected
or
Disconnected
for
the particular line connection
under test.
³
WAN Status
displays whether the
unit is Connected to the wide area
network, or in idle mode.
³
PingTest
is also known as ICMP echo request and determines network
connectivity and accessibility.
³
TraceRoute
reports the path and the time of an IP packet to reach the
destination IP address.
³
HTTP Speed
allows you to evaluate the speed at which a particular
Web page or URL or Web object can be downloaded by the unit.
³
FTP Speed
displays the status of whether the file transfer protocol was
completed or not.
