DMM Tests
66
AXS-200/635
DMM
Voltage
The
Voltage
tab shows measured volts
for each lead combination and allows
you to measure AC/DC voltages and
Frequency
on tip, ring, and ground
(A/B/Earth).
Each parameter is described below.
³
Input Imp.
displays the input
impedance in the loop. The
available choices are:
>1 MOhm
,
100 KOhm
.
³
Connection
defines the type of connection to be tested. The available
choices are:
Tip-Ring
,
Tip-Gnd
,
Ring-Gnd
.
To start/stop the test:
1.
Press the up/down arrow keys to highlight the desired test parameter.
2.
Press
to open the list.
3.
Press the up/down arrow keys to highlight the desired value, then press
to select it.
4.
Select other parameters as required.
5.
Press
to start/stop the test.
Test results are displayed on the screen as they are completed.
