DMM Tests
Copper, VDSL2, ADSL2+, and IP Triple-Play Test Set
69
DMM
Isolation
The
Isolation
tab allows you to run a
resistance test over a period of time to
look for high-resistive faults. This
method may also reveal poor wire
insulation. Select the type of
Connection
to be tested. The available
choices are:
Tip-Ring
,
Tip-Gnd
,
Ring-Gnd
.
Note:
If the ANSI standard is used, the tab
name
Isolation
changes to
Stress/Leakage
.
To start/stop the test:
1.
Press the up/down arrow keys to
highlight the desired test
parameter.
2.
Press
to open the list.
3.
Press the up/down arrow keys to highlight the desired value, then press
to select it.
4.
Press
to start/stop the test.
Test results are displayed on the screen as they are completed.
