Setting Up Your CT440 for Measurements
CT440
33
Connecting the DUT to the CT440
To connect the DUT to the CT440:
1.
Connect the input (or common) port of the DUT to the CT440
Output
port.
The CT440
Output
port is APC type. If the DUT input is PC type, use a clean patch cord
APC/PC and an adapter to interface between the CT440 and the DUT.
2.
Connect the output port of the DUT to the CT440 detector ports.
The detector ports are PC type. If the DUT is APC type, use a clean patch cord APC/PC
and an adapter to interface between the CT440 and the DUT.
W
ARNING
Depending on the safety class of the laser(s) you have connected to the CT440
input port(s), the beam coming from the CT440 output port may be dangerous.
For safe use of the CT440 output port, please respect the safety guidelines of the
laser(s) connected to the CT440 input port(s).
Summary of Contents for CT440 Series
