MaxTester DSL
37
7 Saving and Reading Test
Results
Save Results
You can save a snapshot of test results into a result file during or after a test
performed with the MaxTester DSL. Each Auto Test, xDSL, and Ethernet test includes
a
Save Results
tab to do so.
When a test is completed or stopped, a
Confirm Save Results
dialogue box pops
up. Selecting
Yes
displays the
Save Results
screen where the following information
can be entered:
³
File Name
opens an editor screen where you can
enter a desired file name.
³
Save
button saves the results in binary format for the
test executed.
³
Export Format
generates results of a pre-executed
test in the following formats:
³
binary
³
HTML
³
XML
³
Export File Name
opens an editor screen where you
can enter a desired export file name.
³
Export
button sends the results, in the selected
format, to a USB key. If more than one USB key is
attached to the device, you’ll be asked to select one
from a list of all USB keys attached to the unit.
Note:
If the test is still running (not completed or stopped), only the first two
fields are available and the results are saved to binary format.
To save or export results:
1.
Press the up/down arrows to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options,
Or
3.
Press
to open the on-screen keyboard. to enter or edit a
File Name
.
4.
Press the up/down left/right arrows to navigate the on-screen keyboard.
5.
Select the desired function key to complete your selection.
6.
Select
Save
or
Export
buttons and press
to confirm your selection.
