Impulse Tests
Copper Test
279
Impulse Scope Test
Setting Threshold Values
The
Threshold
page allows you to set the
Impulse Scope Threshold
for
the test.
To access the Threshold page:
1.
From the
Copper
main menu
Test Groups
, select
Impulse
test
.
2.
From the
Tests
menu, select
Impulse Scope
test.
3.
Tap
Edit Thresholds
button to open the
Threshold
page.
4.
Set the threshold as required.
5.
Tap
Close
to confirm and exit the page.
The following parameters are displayed:
The
Voltage Detection Level
allows you to set the test threshold in
either V or mV. The threshold can be changed when the test is running
but will be applied to the next trigger event.
Power Detection Level
is read only, allowing you to view the test
threshold limit.
