Working with the Tunable Laser Source
20
IQ-2600B
Setting the Sweep Parameters
Figure 3-7.
Continuous Mode Options
You can now select the speed at which the sweep will be performed in
nm/s by entering the desired value in the field (minimum of 10 nm/s and
maximum of 50 nm/s).
Note:
You cannot edit the duration of the scan. It will be automatically calculated
according to the speed and wavelength range. The duration is displayed in
59:59:999 format.
Using the Stepped Mode
To select the Stepped sweep mode, select the appropriate radio button in
the
Sweep Setup
menu. The following part of the screen becomes editable.
Figure 3-8.
Stepped Mode Options
You can now set the step at which you want the sweep to be performed by
entering the desired value in the field. You can also select a step in the list
by using the pull-down menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
