Creating and Starting a Test Case
Ethernet and Fibre Channel Application
113
Ethernet TCP Throughput Test Case
Ethernet TCP Throughput Test Case
TCP Throughput
(not available with Ethernet 10G interface)
: Allows
sending TCP/IP traffic to the network and provides an average of the TCP
Throughput based on the successfully transported bytes over the test time.
Two units running a
TCP Throughput
test are required. One unit will act as
the source (Local) and the other one as the destination (Remote).
Note:
TCP Throughput
software option needs to be enabled to be available.
Refer to
To create a TCP Throughput test case, first create the test on the
remote module as follow:
1.
Test configuration:
1a.
Select
Ethernet 10/100/1000
as the
Interface Type
.
1b.
Select
Single Port
as the
Topology
.
Topology is only available with
IQS-8510B.
1c.
Select
TCP Throughput
as the
Application Type
.
1d.
Press
Next
.
