Creating and Starting a Test Case
Ethernet and Fibre Channel Application
115
Ethernet TCP Throughput Test Case
4.
Press the
TCP Throughput
tab and
TCP Throughput Configuration
tab.
4a.
Select
Remote
as the
TCP Mode
.
4b.
Enter the IP address of the local module in the
Listening IP
Address
field.
Create the test on the local module as follow:
1.
On the local module, proceed with the test creation as described
above (start with step 1 on page 113 up to step 4 inclusively). However,
in step 4 do the following:
1a.
Select
Local
as the
TCP Mode
.
1b.
Enter the IP address of the remote module in the
Remote IP
Address
field.
2.
For additional configuration parameters, refer to
3.
Press the
Start
button to start the test.
4.
For additional results, refer to
