Creating and Starting a Test Case
Ethernet and Fibre Channel Application
117
Fibre Channel BERT Test Case
2.
Port configuration:
2a.
For IQS-8510B, select the
port number by pressing
on
Port 1
or
Port 2
.
For IQS-8510B in
Dual
Ports
, select the first port
and proceed with the rest
of the configuration for the
first port. However, before
pressing
Finish
, press
Back
several times to
return to the port setup
window, select the second
port and proceed with the
rest of the configuration for the second port.
Select the Fibre Channel speed.
Choices are
1X
,
2X
for
IQS-8510B/IQS-8525/IQS-8120NGE, and
1X
,
2X
,
4X
, and
10X
for
IQS-8535/IQS-8130NGE.
2b.
Select the PSP check box when a series of handshakes (status
machine) is necessary to have a link up status. When the PSP
check box is cleared, no handshaking is done and only bit
synchronization is necessary to have a link up status. The
PSP
(Link Protocol)
check box is selected by default.
Link
indicates the link status at the input port of the Fibre Channel
interface. A green LED indicates a link up while a grey LED indicates a
link down or disabled. The
Tree
view also displays respectively
Link
up
in green or
Link down
in red.
2c.
Press
Next
.
